當前位置: 梦工厂电影logo > 產品中心 > 三層絕緣線 >

三層絕緣線180℃

特點
★ 具有很高的絕緣等級,省去了常規繞線間的絕緣紙和涂刷絕緣漆
★ 具有優異的耐磨性,實現自動化繞線
★ 不用剝除絕緣層,可以直接焊接
★ 電氣轉換開關的初級和次級線圈之間不需要絕緣隔離層,比傳統的繞線節省1/3的體積,可以實現機器的小型化
FEATURES:
★ Omissible the layer paper and varnish immersion because of high B.D.V.
★ Automatical winding is possible because of superior to resistance to abrasion
★ Solderable without stripping the insulation
★ Needing no interlayer insulation between primary and secondary coils of switching transformers, TMW applied one will be 2/3 of the volume of conventional one, therefore possible to miniaturize the apparatus

用途 
★ IT行業的各種小型變壓器的繞線;


★ 電氣轉換開關的繞線
USE:
★ Winding wire of microtransformers for IT equipments
★ Winding wire of transformers for switching power supplies
特性 Characteristics
 
項目 Item 特性Characteristics
耐電壓6000V/1minElectric strength OK
耐磨性(往復 次)
Resistance to abrasion ( times )Adherence ( exposure mm )
>1000
擊穿電壓(V)
Breakdown voltage ( V )
>20000
軟化溫度(℃)Resistance to cut through ( ℃ ) 260
耐溶劑Resistance to solvent 二甲苯Xylene 5H
  苯乙烯Styrene 5H
焊接性 420℃ (s)Solderability 420℃ 2.0
柔韌性及附著性的擊穿電壓 (V)
Flexibility and adherence breakdown voltage
14000
熱沖擊的擊穿電壓(225℃×30min )(V)
Heat shock breakdown voltage
12000
彎曲測試后的耐電壓 3000V/1min
Retention of electric strength after bending
OK
注:上面的數值是典型值,不是保證值。
Above values are typical and not guarantee specification.

規格Dimensions
導體(mm)Conductor 成品外徑 (mm)Overall diameter 20℃導體電阻(Ω/km)Conductor resistance 20℃ 伸長率(%)ConductorElongation
直徑Diameter 允許公差Tolerance 標準Nominal 最大Maximum
0.20 ±0.008 0.400 0.417 607.6 15
0.21 ±0.008 0.410 0.427 549.0 15
0.22 ±0.008 0.420 0.437 498.4 15
0.23 ±0.008 0.430 0.447 454.5 15
0.24 ±0.008 0.440 0.457 416.2 15
0.25 ±0.008 0.450 0.467 382.5 15
0.26 ±0.010 0.460 0.477 358.4 15
0.27 ±0.010 0.470 0.487 331.4 15
0.28 ±0.010 0.480 0.497 307.3 15
0.29 ±0.010 0.490 0.507 285.7 20
0.30 ±0.010 0.500 0.520 262.9 20
0.32 ±0.010 0.520 0.540 230.0 20
0.35 ±0.010 0.550 0.570 191.2 20
0.37 ±0.010 0.570 0.590 170.6 20
0.40 ±0.010 0.600 0.625 145.3 20
0.45 ±0.010 0.650 0.675 114.2 20
0.50 ±0.010 0.700 0.725 91.43 20
0.55 ±0.020 0.750 0.775 78.15 20
0.60 ±0.020 0.800 0.825 65.26 20
0.65 ±0.020 0.850 0.875 55.31 20
0.70 ±0.020 0.900 0.925 47.47 20
0.75 ±0.020 0.950 0.975 41.19 20
0.80 ±0.020 1.000 1.030 36.08 25
0.85 ±0.020 1.050 1.080 31.87 25
0.90 ±0.020 1.100 1.130 28.35 25
0.95 ±0.020 1.150 1.180 25.38 25
1.00 ±0.030 1.200 1.230 23.33 25
注:可以根據市場需要確定最大外徑值。
Note:Maximum Overall diameter values are by demand of the market.

 

Copyright © 2002-2011 www.gluhr.icu. 深圳市九鼎新材料有限公司 版權所有